CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Difference between External and Internal flow radiation problems

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   April 10, 2018, 04:06
Question Difference between External and Internal flow radiation problems
  #1
Senior Member
 
Kumaresh
Join Date: Oct 2016
Posts: 346
Rep Power: 11
Kummi is on a distinguished road
Send a message via Yahoo to Kummi
Hello everyone,
1) My topic of research is regarding flare gas dispersion into atmosphere – schematic model in Fig. 1. The methane fuel emitted from the flare gas is assumed to be completely combusted before releasing from the flare tower height, which leaves the product CO2 and H2O, at the flare inlet. So, there is no source term in species equation. The solution to figure out the difference between with and without radiation cases is obtained by variation in temperature (Energy equation), but I couldn’t able to find the difference due to the effect of radiation in my case (Fig. 2). P1 radiation contours in Fig. 3


2) My flare gas analysis is external radiation problem. But, in internal flow radiation problems like gas turbine combustor, we can notice apparent variations of radiation by temperature contour.


On the whole, can someone explain me:
(I) What is the exact difference between external and internal flow radiation problems and approach in FLUENT?

(II) How to figure out the difference in effect of radiation in external flow ATMOSPHERIC radiation problem, which I couldn’t able to solve in my flare gas analysis.


*The flow is simple with no UDF – not implemented Monin–Obukhov similarity theory (constant atmospheric temperature)
Kummi is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Combining Internal and External Flow Simulation in SolidWorks rishabm Main CFD Forum 0 December 19, 2017 22:01
External flow or Internal flow boundary domain dinhanh Main CFD Forum 0 June 4, 2017 07:43
Modeling internal and external flow for a nozzle smschnob Main CFD Forum 1 November 11, 2010 18:12
internal flow and external flow ? Pathway0320 FLUENT 1 November 17, 2006 04:37
fluid flow fundas ram Main CFD Forum 5 June 17, 2000 22:31


All times are GMT -4. The time now is 08:53.