Export data in text file

Eferal · July 7, 2011, 09:50

Greetings every one,
I'm using Fluent and OpenFOAM now. The problem is : I'm working on a 3D case with a huge number of cells. I'm doing some POD and I would like to have the data for just a plane. I know how to export the whole data, but the problem is that it's too big to export the data for every point. I would like to be able to select just the point belonging to the plane (around 4000 points). Do you know if I should write a code in fluent or something to do it ?
Thanks in advance for any tips and advise
Antoine

Amir · July 7, 2011, 10:28

Hi,
you can create your face in fluent and then export desired data of this plane:
file->export
I proposed you to use tecplot format.

Regards,

Amir

Eferal · July 7, 2011, 11:51

Thank you Amir !
I forgot an important detail. I need this almost every time step. And that's actually the problem I have. I can record data for every timestep, but I can't chose the surface, it has to be the whole solid.

Amir · July 7, 2011, 15:11

I think that in FLUENT 13 you can export anything during unsteady solution but I'm not sure.
about your points, if they don't locate on a surface, you have to create discrete points and because of the large number of points, you have to use a journal file for automation.

Eferal · July 7, 2011, 16:48

That's true, it works on Fluent 13!
Thank you very much

alialemana · April 13, 2018, 10:33

Dear all,

I have a similar question, I would like to export the data not only from a plane but from a part of my geometry (it is a T-mixer and I would like the data of the outlet part).
Is there a possibility to define a "block" in FLUENT or should I define a part in ICEM CFD?

Thank you very much!

July 7, 2011, 09:50	Export data in text file	#1
Eferal New Member Antoine H. Join Date: Mar 2011 Posts: 13 Rep Power: 15	Greetings every one, I'm using Fluent and OpenFOAM now. The problem is : I'm working on a 3D case with a huge number of cells. I'm doing some POD and I would like to have the data for just a plane. I know how to export the whole data, but the problem is that it's too big to export the data for every point. I would like to be able to select just the point belonging to the plane (around 4000 points). Do you know if I should write a code in fluent or something to do it ? Thanks in advance for any tips and advise Antoine

April 13, 2018, 10:33	Export data from a part of geometry	#6
alialemana New Member Join Date: Jul 2017 Posts: 12 Rep Power: 8	Dear all, I have a similar question, I would like to export the data not only from a plane but from a part of my geometry (it is a T-mixer and I would like the data of the outlet part). Is there a possibility to define a "block" in FLUENT or should I define a part in ICEM CFD? Thank you very much!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
pisoFoam compiling error with OF 1.7.1 on MAC OSX	Greg Givogue	OpenFOAM Programming & Development	3	March 4, 2011 17:18
Regarding FoamX running Kindly help out	hariya03	OpenFOAM Pre-Processing	0	April 18, 2008 04:26
Problem with rhoSimpleFoam	matteo_gautero	OpenFOAM Running, Solving & CFD	0	February 28, 2008 06:51
PHI file structure	Eugene	Phoenics	9	November 2, 2001 22:00
Importing I-DEAS unv file	hbetb	FLUENT	1	August 10, 2001 13:22

July 7, 2011, 10:28		#2
Amir Senior Member Amir Join Date: May 2009 Location: Montreal, QC Posts: 735 Blog Entries: 1 Rep Power: 22	Hi, you can create your face in fluent and then export desired data of this plane: file->export I proposed you to use tecplot format. Regards, Amir

July 7, 2011, 11:51		#3
Eferal New Member Antoine H. Join Date: Mar 2011 Posts: 13 Rep Power: 15	Thank you Amir ! I forgot an important detail. I need this almost every time step. And that's actually the problem I have. I can record data for every timestep, but I can't chose the surface, it has to be the whole solid.

July 7, 2011, 15:11		#4
Amir Senior Member Amir Join Date: May 2009 Location: Montreal, QC Posts: 735 Blog Entries: 1 Rep Power: 22	I think that in FLUENT 13 you can export anything during unsteady solution but I'm not sure. about your points, if they don't locate on a surface, you have to create discrete points and because of the large number of points, you have to use a journal file for automation.

July 7, 2011, 16:48		#5
Eferal New Member Antoine H. Join Date: Mar 2011 Posts: 13 Rep Power: 15	That's true, it works on Fluent 13! Thank you very much