Tetra mesh appears to intersect the BL -- CFD Online Discussion Forums

April 14, 2018, 18:17

Tetra mesh appears to intersect the BL

kmartis2012

New Member

Klint Martis

Join Date: Jan 2018

Posts: 1

Rep Power: 0

Hello, I am fairly new to FLUENT and my research topic involves film cooling holes for a turbine blade. Upon checking my mesh I found that some of the elements seem to protrude outside of my domain. I am uncertain if this will affect my solution and/or how to fix it. I am using the FLUENT academic license so I am restricted by the 512000 element limit (currently at 388000). I have attached an image of the problem mesh. If anyone can provide me with insight into my mesh it will be appreciated.

Attached Images

Pic 1.PNG (105.1 KB, 3 views)

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[ICEM] Generating Mesh for STL Car in Windtunnel Simulation	tommymoose	ANSYS Meshing & Geometry	48	April 15, 2013 04:24
[snappyHexMesh] Layers:problem with curvature	giulio.topazio	OpenFOAM Meshing & Mesh Conversion	10	August 22, 2012 09:03
[ICEM] Hugh cell jump in Tetra mesh	jeevankumarb	ANSYS Meshing & Geometry	3	June 2, 2010 10:45
Icemcfd 11: Loss of mesh from surface mesh option?	Joe	CFX	2	March 26, 2007 18:10
How to control Minximum mesh space?	hung	FLUENT	7	April 18, 2005 09:38

All times are GMT -4. The time now is 19:34.