CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > ANSYS > FLUENT

Open channel with a weir placed at midway

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Search this Thread Display Modes
Old   August 11, 2018, 10:54
Default Open channel with a weir placed at midway
subhankar das
Join Date: Jul 2018
Posts: 32
Rep Power: 6
subhankarnits is on a distinguished road
I'm using ansys fulent. I'm specifying pressure at both inlet and outlet.
I specified inlet total gauge pressure as 1pa and outlet a zero. Solver- steady lamina material-water reference values- from inlet solutions methods- SIMPlE
Standard initiation- initial guess compute from inlet
When I run the calculation reverse flow is occurring and solution doesn't converged.
What to do ?
subhankarnits is offline   Reply With Quote


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
[swak4Foam] funkyDoCalc with OF2.3 massflow NiFl OpenFOAM Community Contributions 14 November 25, 2020 04:30
Enabling Open Channel Flow Sub-Model in Mixture model cod213 FLUENT 0 January 10, 2017 14:40
Open Channel Boundary Conditions Issues Env FLUENT 8 June 28, 2016 17:05
OpenFOAM without MPI kokizzu OpenFOAM Installation 4 May 26, 2014 10:17
interFoam & decomposition method: scotch MacGyver OpenFOAM Running, Solving & CFD 2 May 23, 2012 08:00

All times are GMT -4. The time now is 03:36.