CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   FLUENT (https://www.cfd-online.com/Forums/fluent/)
-   -   Plot generation in ANSYS CFD Post (https://www.cfd-online.com/Forums/fluent/207960-plot-generation-ansys-cfd-post.html)

YMAkib October 7, 2018 10:31

Plot generation in ANSYS CFD Post
 
1. How can I generate the plot of non-dimensional distance (d/c) vs non-dimensional velocity magnitude (u/U) in ANSYS CFD Post. The figure is shown below:
https://i.imgur.com/bqDf2Go.png
From the figure, the graph is plotted at a particular distance (say x/c=0.25).
What should I choose in data source location, next figure:
https://i.imgur.com/zx98Na0.png

2. How can I generate non-dimensional vorticity field in ANSYS CFD Post. Figure is shown below:
https://i.imgur.com/EQAWwLL.png

Leonardo.flores October 17, 2018 04:57

Instead of streamline it should be a line you created. And non dimensional vorticity can be wc/V, whee w is vorticity, c is chord or reference length, and V is reference velocity


All times are GMT -4. The time now is 08:25.