|
[Sponsors] |
which turbulent model is appropriate for this simple problem |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
November 10, 2018, 02:17 |
which turbulent model is appropriate for this simple problem
|
#1 |
New Member
NGUYEN Van Huy
Join Date: Nov 2018
Posts: 2
Rep Power: 0 |
Hello everyone
I'm simulating a flow over a radome (radar dome - as shown in the attached figure) with a wind speed of 67m/s. Which turbulent model is appropriate for this problem? k-epsilon or k-omega or another model? Thank you very much!! Last edited by HUY; November 10, 2018 at 02:20. Reason: spelled incorrect at title |
|
Tags |
radome |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Use of k-epsilon and k-omega Models | Jade M | Main CFD Forum | 40 | January 27, 2023 07:18 |
Question about the Low Reynolds K-Omega turbulent model. | dinhanh | Main CFD Forum | 0 | July 14, 2017 05:53 |
Problem importing watertight model into CFX | djk1301 | ANSYS | 3 | February 1, 2011 22:04 |
Half laminar and turbulent model trying to solve | Andrew Clarke | FLUENT | 5 | May 19, 2008 13:40 |
multiphase mixing Problem with MRF model in MixSim | Srinivas | FLUENT | 0 | October 17, 2005 06:35 |