Cut plane sector
How to cut a sector of a plane in Fluent for results? Like quadrant or 30 degree sector of circular plane?
|
Under the Postprocessing tab in Fluent, in the Surface section (on the left), click create and isosurface. here you can create a surface of iso value of certain property. in your case the property should be mesh x,y, or z to create the plane cut. than you can create a transformed surface from the surface you have just created and rotate it to the angle of interest.
|
Thank you so much. I will try this.
|
After I make such iso surface plane, can I calculate area weighted average of a property?
|
you can, but it might not be what you want, look at a contour plot on that surface to see if it looks like you expected, make sure it make sense.
Also, when you make the iso-surface, you can create it from one or more cellzone, or from the whole domain, if that helps. |
Thankyou![emoji106]
|
All times are GMT -4. The time now is 06:43. |