CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

constant wall temperature of the channel

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 15, 2019, 15:56
Default constant wall temperature of the channel
  #1
Senior Member
 
Weiqiang Liu
Join Date: Feb 2018
Posts: 278
Rep Power: 9
Weiqiang Liu is on a distinguished road
hello, All:

I am doing a micro channel catalytic combustion of methane simulation. When I was doing some literature reviews, I found some authors just set the wall thermal boundary condition as constant temperature like 1500K.

I am wondering what is the meaning of setting a constant wall temperature. In real application, if you can impose some variant heat flux on the wall to keep the wall temperature constant during chemical reaction. Then what is the meaning to keep this temperature constant?


weiqiang
Weiqiang Liu is offline   Reply With Quote

Old   February 15, 2019, 15:59
Default
  #2
Senior Member
 
Weiqiang Liu
Join Date: Feb 2018
Posts: 278
Rep Power: 9
Weiqiang Liu is on a distinguished road
I mean why those author just set some adiabatic or convective thermal boundary condition to simulate real situation. I think this makes more sense.
Weiqiang Liu is offline   Reply With Quote

Reply

Tags
constant wall temperature

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[openSmoke] libOpenSMOKE Tobi OpenFOAM Community Contributions 562 January 25, 2023 10:21
How To Calculate Average Heat Transfer Coefficient in CFD-Post? Shomaz ul Haq CFX 16 November 24, 2019 19:57
Fluent UDF for Non linear wall temperature gives constant wall T after initialisation anuarun Fluent UDF and Scheme Programming 2 May 16, 2017 11:25
Simple piston movement in cylinder- fluid models arun1994 CFX 4 July 8, 2016 03:54
Deformation of wall by temperature condition Jay FLUENT 0 April 14, 2007 19:06


All times are GMT -4. The time now is 13:40.