CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   FLUENT (https://www.cfd-online.com/Forums/fluent/)
-   -   Temperature Time Profile Inside Tube (https://www.cfd-online.com/Forums/fluent/220946-temperature-time-profile-inside-tube.html)

alexschu September 27, 2019 15:39

Temperature Time Profile Inside Tube
 
Hello,


I have a model of a tube with 1.5m length where 0.5m is heated to 1200 C. My goal is to get a temperature vs time profile across the streamline in the middle (x axis is time, y axis is temperature). The fluid used is air. The flow is transient.



I am uncertain how to get further from this point, as extensive research (which I might have done wrong) did not help me.


My idea was to track a single particle position vs time which enters the tube and then combining this with the temperature vs position plot I would have my result, but I am not getting any further



I am using Fluent 2019 R2 and CFD Post 2019 R2.


All times are GMT -4. The time now is 13:27.