Vaporization and condensation ansys fluent
 

Hello friends.

There was a problem. Can't make the vaporization in the tube. That is, the tube operates, the temperature of 3000K. The tube enters the water is 0.1 m/s, and the output pair is not PRESENT, even a little bit. If faced with such a problem, I will be happy for help.

Link to the entire project.
https://yadi.sk/d/t4Rvby-R6bwIfg

Hello friends.

There was a problem. Can't make evaporation in the tube. The temperature of 3000K acts on the tube. Water enters the tube at 0.1 m/s, and there is no output pair, even a little. If you encounter such a problem, I will be glad for help.

Link to the project
https://yadi.sk/d/t4Rvby-R6bwIfg[/QUOTE]

Really 3000 K? What is the material of your tube?
Due to the high temperature difference between the liquid water and 3000 K it will be very complicated to setup the vaporization correctly.