[ehsan120]

Hi,

I want to take area-averaged velocity in a specific region (please see the figure attached here). Do you know how I can do this? Do I need to define a new cell zone? If so, where I can define a new cell zone in Fluent?

Thanks in advance for your help.

[vinerm]

Though it can be done with ease, you do not need to define a new cell zone. You can create an iso-clip by defining minimum and maximum values for the coordinates and create an iso-clip from an existing surface or zone. Then, you can report whatever parameter you want on this iso-clip. Iso-clip is available under Surface.

[ehsan120]

Thanks for the prompt response. How if I want to make a new cell zone? Is it possible to do this in Fluent or I need to do it in the mesh?

Thanks.

[vinerm]

You can do that in Fluent, however, a clear demarcation is not always possible. You can use Adapt > Field Variables > Mark after defining minimum and maximum values for any field variable, say, position coordinates or pressure or temperature. Then, using this mark, you can separate cell zone into multiple parts.

[ratnadeepnath@yahoo.in]

Hello everyone!!

In ansys post processing, I have created a surface which interacts with a fan blade. Now, I want the boundary interaction between the two and and create a polyline where Cp value can be calculated. How to do that, any suggesions?