Units in Bladegen

baeblue · May 21, 2020, 09:41

Im trying to use Blade Gen. But I still cant understand, what the units in Bladegen. Such lik in Length, there is no units. So i cant decide it was meter or somethinh else. Maybe you can help me. Thanks!!

Murillo · March 16, 2022, 14:25

You can set the model units by clicking at "Model" (upper left corner) and then "Properties". The "Model Property Dialog" box will appear. You can choose the length units by clicking at "Model Units" and selecting the desired option.

May 21, 2020, 09:41	Units in Bladegen	#1
baeblue New Member Join Date: May 2020 Posts: 20 Rep Power: 5	Im trying to use Blade Gen. But I still cant understand, what the units in Bladegen. Such lik in Length, there is no units. So i cant decide it was meter or somethinh else. Maybe you can help me. Thanks!!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
fvOptions() Options and SemiImplicit Source Term - Units	Tobi	OpenFOAM Programming & Development	11	February 18, 2021 09:13
Thermophysical Property Units	johanz	OpenFOAM Pre-Processing	2	December 16, 2018 10:08
BladeGen problem	David Wang	CFX	5	April 2, 2016 05:18
How do I change the units?	jstaker7	Autodesk Simulation CFD	1	January 7, 2013 18:42
units in OpenFOAM	megacrout	OpenFOAM	4	July 19, 2011 08:04

March 16, 2022, 14:25		#2
Murillo New Member Join Date: Mar 2022 Posts: 5 Rep Power: 4	You can set the model units by clicking at "Model" (upper left corner) and then "Properties". The "Model Property Dialog" box will appear. You can choose the length units by clicking at "Model Units" and selecting the desired option.