CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Conjugate Parallel Issue!

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   May 23, 2020, 18:27
Default Conjugate Parallel Issue!
  #1
New Member
 
Chris
Join Date: Apr 2020
Posts: 29
Rep Power: 2
buckngnr11 is on a distinguished road
Hello. I'm not too familiar with conjugate simulations in Fluent, but I created my mesh and set up my contact interfaces and boundary conditions in serial mode. Was able to run without issue but need to be able to open in parallel. I saved the .cas and .dat files, and when I try to reopen with more than 1 processor, I get a cortex exception. It appears to be an issue with the interfaces and maybe partitioning them, but Fluent recognizes these contact interfaces automatically when the mesh is loaded so I don't know how to get around this problem? If I try to start from scratch and load in the .msh file in parallel mode, it fails when the adjacent interfaces are being read.
buckngnr11 is offline   Reply With Quote

Old   May 25, 2020, 12:37
Default Interfaces
  #2
Senior Member
 
vinerm's Avatar
 
Vinerm
Join Date: Jun 2009
Location: Nederland
Posts: 2,547
Blog Entries: 1
Rep Power: 28
vinerm will become famous soon enough
Fluent does not require interfaces for fluid-solid communication. You can use standard, conformal mesh. Fluent will automatically create wall-shadow pairs.
__________________
Regards,
Vinerm

PM to be used if and only if you do not want something to be shared on the Forum
vinerm is online now   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
InterTrackFoam parallel issue zbli OpenFOAM Running, Solving & CFD 5 March 9, 2016 09:57
OpenFoam parallel running log issue clktp OpenFOAM Running, Solving & CFD 2 January 19, 2016 09:12
interDyMFoam parallel issue in OF 3.1.x-ext Ya_Squall2010 OpenFOAM Running, Solving & CFD 3 October 24, 2015 12:06
Conjugate Heat Transfer Issue abc197 FLUENT 4 July 21, 2013 23:49
parallel Grief: BoundaryFields ok in single CPU but NOT in Parallel JR22 OpenFOAM Running, Solving & CFD 2 April 19, 2013 16:49


All times are GMT -4. The time now is 07:32.