 |
 |
 |
|
|
|
[Sponsors] | ||||
June 24, 2020, 19:29
|
Normal lines to airfoil surface
|
#1 |
|
New Member
Aoife
Join Date: Jun 2020
Posts: 1
Rep Power: 0  |
Hi!
I am trying to create velocity profile plots for the flow over an airfoil in ANSYS fluent. from my understanding, the best way to do this is to create a line normal to the airfoil surface at the desired points and then create a chart of velocity against y using the normal line. My problem is that i am unable to create a line that is normal to the surface. it seems that in older versions of ANSYS fluent there was a 'normal' option when generating a line, which i cant seem to find in the 2020 version. I am sure there is something very simple that i am missing but i cant seem to figure it out. I would greatly appreciate any help you can give! Kind regards, Aoife |
|
|
|
|
 |
| Tags |
| airfoil 2d, fluent, normal to surface |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| [Gmsh] gmshToFoam generates patches with 0 faces and 0 points | Simurgh | OpenFOAM Meshing & Mesh Conversion | 4 | August 25, 2023 07:58 |
| How is the normal unit vector calculated for 2D airfoil surface gradients? | Ry10 | SU2 | 5 | February 27, 2018 06:28 |
| [swak4Foam] Set surface normal manually in groovyBC | Mitchell Baum | OpenFOAM Community Contributions | 1 | March 15, 2016 00:25 |
| elliptical solver - grid lines going into the surface | syoo | Pointwise & Gridgen | 5 | January 23, 2014 17:05 |
| [ICEM] Automatic mesh generation script surface intersection problem | stuart23 | ANSYS Meshing & Geometry | 0 | May 13, 2011 01:10 |
Linear Mode
