Is it possible the velocity profile changes in the fully-developed turbulent flow?
 

Hello, I am a new one in Ansys Fluent, and have a question now. I want to know: for a fully-developed turbulent flow, is it possible that the velocity profile changes along horizontal axis?
the model is the air flows in a pipe. First of all, for laminar flow, I input the parabolic equation at the inlet, and then the velocity profile of the laminar flow does not change, which is a fully-developed flow.
For the turbulent flow, I input the same parameters and equation from the laminar flow, just change the viscous from laminar to k-ε standard. But this time, the velocity profile of the turbulence flow changes, unlike the laminar flow.
I want to know is it possible that the velocity profile changes for a fully-developed turbulent flow? If possible, why changes? If impossible, which means the velocity profile should be constant, so how to set up a fully-developed turbulence flow with constant velocity profile?
I have also put the details in the pictures, thank you!

https://scontent-dub4-1.xx.fbcdn.net...99&oe=5F2BD849
https://scontent-dub4-1.xx.fbcdn.net...43&oe=5F2BE433