CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Water-solid DPM: negative impact angle

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   July 29, 2020, 05:15
Question Water-solid DPM: negative impact angle
  #1
New Member
 
OK
Join Date: Sep 2017
Posts: 1
Rep Power: 0
haz328 is on a distinguished road
Dear all:

I conducted a water-solid DPM simulation in a multistage-centrifugal pump and extracted impact information (angle, speed, hits number) through UDF to study the erosion results. Questions are:

1. When I use the sliding mesh method (for the rotating impeller), I got negative impact angles on the blades. Does anyone know what's going one there?

2. When I use the frozen rotor method (for the rotating impeller), the erosion results are fine. But the frozen rotor method has its own problem with the pump, especially for multistage pumps. I would prefer sliding mesh if the problem was solved.

Thank you for the help!
haz328 is offline   Reply With Quote

Reply

Tags
centrifugal pump, dpm, erosion, impact angle, sliding mesh

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Strange behavior of water surface near solid body JBrake OpenFOAM Running, Solving & CFD 6 January 16, 2019 18:51
No conjugate heat transfer between solid (cast iron) and fluid (water) Rajaero Main CFD Forum 1 August 23, 2018 14:01
simulation with dpm : exchange of heat with a solid cdiako Fluent UDF and Scheme Programming 1 June 17, 2016 09:28
[blockMesh] Errors during blockMesh meshing Madeleine P. Vincent OpenFOAM Meshing & Mesh Conversion 51 May 30, 2016 11:51
[blockMesh] non-orthogonal faces and incorrect orientation? nennbs OpenFOAM Meshing & Mesh Conversion 7 April 17, 2013 06:42


All times are GMT -4. The time now is 09:25.