|
[Sponsors] |
I_Anode much bigger than I_Cathode in PEMFC model despite convergence. |
![]() |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
![]() |
![]() |
#1 |
New Member
Rob
Join Date: Jul 2020
Posts: 4
Rep Power: 6 ![]() |
I am using the PEMFC module and after setting it all up, the solver runs and all the residuals slowly fall. Somehow, the current density at the anode is about double that of the cathode. The contours I've made look good, too. I can't identify the issue so If anyone has run into this issue and was able to solve it I'd love to know. Thanks.
|
|
![]() |
![]() |
![]() |
Tags |
current density, pem, pemfc, pemfc module |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
convergence problem k-kt-omega model | TUMate | FLUENT | 0 | April 21, 2015 07:46 |
solution convergence and mesh density in k-omega model (FLUENT) | ripong | FLUENT | 0 | January 29, 2015 17:09 |
Overflow Error in Multiphase Modelling with Two Continuous Fluids | ashtonJ | CFX | 6 | August 11, 2014 14:32 |
Convergence problems with SSG turbulence model | Ram | CFX | 1 | June 19, 2006 10:08 |
convergence in particle transport model | Jose Tinoco | CFX | 0 | March 3, 2003 03:10 |