CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > ANSYS > FLUENT

Dynamic mesh and Frame motion

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Search this Thread Display Modes
Old   November 18, 2020, 02:21
Default Dynamic mesh and Frame motion
New Member
Join Date: Nov 2020
Posts: 1
Rep Power: 0
21912219 is on a distinguished road
Hi, I am trying to simulate the motion of the ball(the sphere is regraded as a rigid body) in a tank full of water, and the tank is in a centrifuge.
In Fluent, I set both dynamic mesh, 6DOF model and frame motion options.
Frame motion is set throughout the computational domain.
In the tank, dynamic mesh and 6DOF model are set to make sure that the ball is free to fall as the tank rotates.
Please tell me, is this going to work? What should I pay attention to in the settings?
Thank you!

Last edited by 21912219; November 18, 2020 at 02:42. Reason: forget a picture
21912219 is offline   Reply With Quote


dynamic mesh, fluent, frame motion

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
sliding mesh problem in CFX Saima CFX 46 September 11, 2021 07:38
Moving Reference Frame + Mesh Motion @sher FLUENT 0 May 9, 2019 04:22
Difficulty in calculating angular velocity of Savonius turbine simulation alfaruk CFX 14 March 17, 2017 06:08
Implementing a dynamic mesh motion solver in an accelerating frame pruthvi1991 OpenFOAM Programming & Development 1 March 22, 2015 15:18
Explanation moving mesh, moving frame, or dynamic mesh fbar FLUENT 1 April 13, 2012 07:57

All times are GMT -4. The time now is 04:38.