CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   FLUENT (https://www.cfd-online.com/Forums/fluent/)
-   -   mixing plane and Particle tracks error (https://www.cfd-online.com/Forums/fluent/232826-mixing-plane-particle-tracks-error.html)

Darius12345 January 1, 2021 09:19

mixing plane and Particle tracks error
 
Hello and happy new year to everyone,

I am trying to simulate Particle tracks in a Rotor-Stator setup where I use the turbo mixing plane model to connect the rotating and the steady mixing plane.

My problem is, that every time I want to calculate either particle tracks or streamlines I get an error, mostly this one:
PHP Code:

'Error at Node 0 (or any other number): Error getting the barycentric matrix in ensure_point_is_in_subtet' 

but Sometimes something like 'Unknown Cell Type' or something with graphics also appears.

I have also tested with the two other turbo-models pitch-scale and no-pitch-scale, here the same error appears. However, if I do not select any special option for the interface in the turbo-create menu, I can generate particle tracks or streamlines without problems.

If someone has an idea why this is happening, I am grateful for any help.

Best regards
Darius


All times are GMT -4. The time now is 22:46.