 |
 |
 |
|
|
|
[Sponsors] | ||||
initialize selected cells with pressure then the rest cells |
 |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
January 30, 2021, 13:13
|
initialize selected cells with pressure then the rest cells
|
#1 |
|
Member
Dennis
Join Date: Jul 2016
Location: Germany
Posts: 39
Rep Power: 9  |
hello,
i'm using fluent 2020R2 and want to simulate an emptying process of a high pressure tank. How is it possible to initialize the cells in the pressure with a higher pressure than the other cells? I already have a mesh for star-ccm+. I know that in star-ccm+ you can do it with cellsets. |
|
|
|
|
|
| Tags |
| cell zone, cellset, initial condition |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Foam::error::PrintStack | almir | OpenFOAM Running, Solving & CFD | 91 | December 21, 2022 04:50 |
| [snappyHexMesh] No layers in a small gap | bobburnquist | OpenFOAM Meshing & Mesh Conversion | 6 | August 26, 2015 09:38 |
| [snappyHexMesh] snappyHexMesh won't work - zeros everywhere! | sc298 | OpenFOAM Meshing & Mesh Conversion | 2 | March 27, 2011 21:11 |
| Gas pressure question | Dan Moskal | Main CFD Forum | 0 | October 24, 2002 22:02 |
| Hydrostatic pressure in 2-phase flow modeling (long) | DS & HB | Main CFD Forum | 0 | January 8, 2000 15:00 |
Linear Mode
