CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Implimentation of zero-order extrapolation boundary condition

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 25, 2021, 11:40
Default Implimentation of zero-order extrapolation boundary condition
  #1
New Member
 
Bhanuday Sharma
Join Date: Jun 2015
Posts: 18
Rep Power: 10
bhanuday.sharma is on a distinguished road
I am simulating a hypersonic flow. The flow is hypersonic at both inlet and outlet. I wish to implement zero-order extrapolation boundary condition at outlet. How can it be done in ANSYS Fluent?

The Pressure Outlet can be one possible choice. The Fluent Manual mentions that - "The value of the specified static pressure is used only while the flow is subsonic. Should the flow become locally supersonic, the specified pressure will no longer be used; pressure will be extrapolated from the flow in the interior. All other flow quantities are extrapolated from the interior."

But, there might be a case where the flow is subsonic in a part of the Pressure-Outlet boundary (e.g., near the wall) and supersonic in other part of the same boundary. In that case, pressure boundary will be applied where the flow is subsonic and zero-order extrapolation boundary condition will be used where the flow is supersonic.

However, I wish to extrapolate all the quantities from the interior irrespective of the flow being subsonic or supersonic. How can this be achieved in ANSYS Fluent?

Last edited by bhanuday.sharma; March 11, 2021 at 08:20. Reason: Added more details
bhanuday.sharma is offline   Reply With Quote

Reply

Tags
boundary condition, hypersonic flow

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Constant mass flow rate boundary condition sahm OpenFOAM 0 June 20, 2018 23:45
Question about adaptive timestepping Guille1811 CFX 25 November 12, 2017 18:38
Wrong flow in ratating domain problem Sanyo CFX 17 August 15, 2015 07:20
External Radiation Boundary Condition (Two sided wall), Grid Interface CFD XUE FLUENT 0 July 8, 2010 07:49
Convective Heat Transfer - Heat Exchanger Mark CFX 6 November 15, 2004 16:55


All times are GMT -4. The time now is 12:07.