|
[Sponsors] |
April 18, 2021, 09:33 |
divergence-detected-amg-solver-temperatur
|
#1 |
New Member
amina
Join Date: Feb 2020
Posts: 8
Rep Power: 6 |
hi every one,
i tried to put an UDF for thermal conductivity (conductivity= viscosity / prandt number). the viscosity is calculated by the sutherland law, and the prandt number egale to 0.71, so the relation is : conductivity=viscosity(by sutherland)/0.71 i load my UDF , i corrected the errors, i choose KTC_sutherland for conductivity and sutheland for viscosity. but when i start the calculation i get an error: divergence-detected-amg-solver-temperatur here is my UDF: #include "udf.h" DEFINE_PROPERTY(KTC_sutherland,c,t) { real KTC; real MU_L; #define pr 0.71 KTC= MU_L/pr ; return KTC; } for the configuration, i have a square cavity failled by air with vertical differencial heated walls, the horizontal ones are adiabatics . for mesh i use the streched one near the walls . |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
PEMFC model with FLUENT | brahimchoice | FLUENT | 22 | April 19, 2020 15:44 |
Divergence detected in AMG solver: pressure correction | xinquanzhoucn | FLUENT | 5 | July 21, 2014 04:49 |
Floating point error and divergence detected | aannjj | FLUENT | 0 | July 2, 2013 03:44 |
3d vof | Smaras | FLUENT | 2 | February 19, 2013 06:58 |
Quarter Burner mesh with periosic condition | SamCanuck | FLUENT | 2 | August 31, 2011 11:34 |