Calculating local heat transfer coefficient for Cylindrical fins
3 Attachment(s)
Dear CFD-Online Fraternity,
I have a steady state heat transfer problem, where I cool a heat source (bottom) with flowing water(laminar) by the help of cylindrical fin arrays. I have an 8x8 array and an 8x1 array and I need to compare the local heat transfer coefficient, so that I can validate using an 8x1 instead of an 8x8 to reduce the computational effort needed for my simulation. I need to calculate the local heat transfer coefficient (h) for the below shown systems. All I can do in ANSYS Fluent now, is to calculate the volume-averaged Surface heat transfer coefficient. Attachment 84096 Attachment 84097 Consider, in these geometries, each cell is 5mm x 5mm. (with a cylindrical fin in the centre of each cell as shown in the image below) Attachment 84098 I would like to know how I can individually calculate the heat transfer coefficient for each cell, so that I can compare both the geometries. Any leads are very much appreciated. |
All times are GMT -4. The time now is 11:57. |