Setting velocity UDF at outlets

dsofi32 · July 14, 2021, 08:43

I have a coronary artery and I am trying to implement a UDF of pressure in the inlet (pressure-inlet type) and a velocity profile in the outlets (mass-flow-outlet type). I understand that velocity and mass flow rate are different things, but the profile shape is the same (just different magnitudes).

This approach is inspired by Fig. 4 of an article (https://doi.org/10.1080/10255842.2014.921682).

I can implement the inlet pressure, but I cannot define the outlet velocity... the closest is mass flow rate which I selected.

When I run the calculation, Fluent returns the following error:

Error: / (divide): invalid argument [1]: wrong type [not a number] Error Object: inf.

I have tried doing the opposite (inlet velocity and outlet pressures) and there are no errors...

Any help? Thanks in advance

LuckyTran · July 15, 2021, 13:18

Not sure what your error is. Check your UDF. But you can specify the velocity if you use a velocity inlet type BC at an outlet. The BC type may be named an inlet but it is a fixed velocity constraint.

July 14, 2021, 08:43	Setting velocity UDF at outlets	#1
dsofi32 New Member sofia Join Date: Jul 2021 Posts: 5 Rep Power: 4	I have a coronary artery and I am trying to implement a UDF of pressure in the inlet (pressure-inlet type) and a velocity profile in the outlets (mass-flow-outlet type). I understand that velocity and mass flow rate are different things, but the profile shape is the same (just different magnitudes). This approach is inspired by Fig. 4 of an article (https://doi.org/10.1080/10255842.2014.921682). I can implement the inlet pressure, but I cannot define the outlet velocity... the closest is mass flow rate which I selected. When I run the calculation, Fluent returns the following error: Error: / (divide): invalid argument [1]: wrong type [not a number] Error Object: inf. I have tried doing the opposite (inlet velocity and outlet pressures) and there are no errors... Any help? Thanks in advance

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
serial udf to parallel udf	radioss	Fluent UDF and Scheme Programming	10	January 19, 2019 08:56
UDF for inlet velocity alongwith UDF for properties	akshayy224	FLUENT	0	February 1, 2018 09:17
3-D parabolic velocity Inlet - Steady state - UDF Turbulent Flow	mohibanwar	Fluent UDF and Scheme Programming	10	May 18, 2015 10:34
Simulation with UDF for species mass fraction and velocity profile	virgy	Fluent UDF and Scheme Programming	8	February 7, 2012 04:30
Cells with t below lower limit	Purushothama	Siemens	2	May 31, 2010 21:58

July 15, 2021, 13:18		#2
LuckyTran Senior Member Lucky Join Date: Apr 2011 Location: Orlando, FL USA Posts: 5,668 Rep Power: 65	Not sure what your error is. Check your UDF. But you can specify the velocity if you use a velocity inlet type BC at an outlet. The BC type may be named an inlet but it is a fixed velocity constraint.