Overset rotating domain

EleGiova · August 7, 2021, 15:08

Hi everyone!

I am simulating 2 propellers with overset mesh. I have a mesh for each prop and a background box mesh.
When I simulate only one prop, I have good quality of the solution, when I simulate both I have this kind of bad resolution.
Could you please help me? Do you know if I have to set something else? My turbulence model + near wall treatment is compatible with my case (the results I am having with the single propeller confirm that).

Maybe I have to set something else?
Thank you in advance!
E.G

munjalpu · August 10, 2021, 15:10

Please post any evidence for "bad resolution"?. Are you referring to convergence issues due to mesh?.

EleGiova · August 10, 2021, 15:22

The convergence is ok and even the thrust and power report files are what I expected, but then when I display contour of velocity field, for example, I have this kind of field (image attached). It is just where I have the other mesh appended.
I have a perfect field when I simulate with the same meshes only one propeller. In this case I have 2 meshes, one for each propeller , which overset each other, and then the background box.

August 7, 2021, 15:08	Overset rotating domain	#1
EleGiova New Member Join Date: Nov 2019 Posts: 13 Rep Power: 6	Hi everyone! I am simulating 2 propellers with overset mesh. I have a mesh for each prop and a background box mesh. When I simulate only one prop, I have good quality of the solution, when I simulate both I have this kind of bad resolution. Could you please help me? Do you know if I have to set something else? My turbulence model + near wall treatment is compatible with my case (the results I am having with the single propeller confirm that). Maybe I have to set something else? Thank you in advance! E.G

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
STAR CCM+: Rotating Computational Domain	Downforce123	Siemens	0	December 11, 2018 17:02
CFX rotating Domain	cfxbeginner	CFX	25	June 21, 2017 11:00
Out File does not show Imbalance in %	Mmaragann	CFX	5	January 20, 2017 10:20
Sudden increase the residual of Maxwell's equations	hsezsz	CFX	2	October 13, 2016 06:58
standing interface in a rotating domain	marc.ls2013	CFX	1	May 28, 2013 06:11

August 10, 2021, 15:10		#2
munjalpu New Member munjalshah Join Date: Dec 2016 Location: Buffalo,NY Posts: 8 Rep Power: 9	Please post any evidence for "bad resolution"?. Are you referring to convergence issues due to mesh?.