CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

PEMFC addon module problem

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   August 12, 2021, 13:25
Default PEMFC addon module problem
  #1
New Member
 
Dongjin Yu
Join Date: Aug 2021
Posts: 2
Rep Power: 0
youdongjin16 is on a distinguished road
Hi all, It is my first time to post on CFD online. I’ve got some problem with PEMFC simulation using ANSYS Fluent PEMFC addon module.

I’m doing various operating conditions such as operating pressure and inlet relative humidity. In the experimental results, higher operating pressure and inlet relative humidity can improve the PEMFC performance.

I finished validation with experimental data and grid dependency test. After that, decreased relative humidity from 100% to 50%. As a result, pemfc performance was increased. That’s really weird.

Operating pressure is 2 atm. But when I change it to 1 atm, the result was reasonable (decreased performance of pemfc).

My question is “should I have to consider something else when I change operating pressure and why this weird results are appeared?”

Please answer my question.

Thanks.
youdongjin16 is offline   Reply With Quote

Old   August 16, 2021, 23:53
Default
  #2
New Member
 
SahraHD
Join Date: Mar 2021
Posts: 1
Rep Power: 0
SahraHD is on a distinguished road
Hi, I also use ANSYS FLUENT PEMFC addon module, but there is a big difference in current density with experimental data; for example, at V= 0.7 the current density is about 0.4 (A/cm2) but when I try PEMFC module it is 0.0006 (A/cm2). Could you help me to find what is wrong?
Thanks in advance.
SahraHD is offline   Reply With Quote

Reply

Tags
pemfc, performance, pressure

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
PEMFC module manual for Ansys fluent 12.1 (2011) aarvay FLUENT 6 May 3, 2023 05:53
Ansys fluent PEMFC addon: Getting 0 Current during simulation?? Michael104 FLUENT 0 December 16, 2019 13:30
PEMFC Module Ansys Fluent 17.2 Sundeep FLUENT 11 February 28, 2019 00:43
Anyone here used PEMFC module? Elvis143BRA FLUENT 0 January 21, 2017 15:49
Gambit - meshing over airfoil wrapping (?) problem JFDC FLUENT 1 July 11, 2011 06:59


All times are GMT -4. The time now is 10:13.