Home > Forums > Software User Forums > ANSYS > FLUENT

boundary condition for suction of fumes/smoke

Updated Threads

Reply

Search this Thread

October 12, 2021, 06:48	boundary condition for suction of fumes/smoke	#1
Mp1956 New Member matal Join Date: Oct 2021 Posts: 1 Rep Power: 0	I saw some threads where it was written no to use pressure-pressure boundary condition.my problem is i want to know the capture velocity at the inlet so that i can capture the fumes which are generated during welding/laser cutting. what boundary condition and physics(solver) should i apply for this type of problem? . i have "static pressure" of the blower/extractor which we are using to extract the fume from the workplace. The blower is connected to duct(metal duct) and at the inlet of duct the fumes are generated . thank you!! please help

Reply

Tags

ansys 19.0, boundary condition, cfd, fluent 19.2

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
sliding mesh problem in CFX	Saima	CFX	46	September 11, 2021 07:38
Centrifugal fan	j0hnny	CFX	13	October 1, 2019 13:55
Basic Nozzle-Expander Design	karmavatar	CFX	20	March 20, 2016 08:44
Accessing multiple boundary patches from a custom boundary condition file	ripudaman	OpenFOAM Programming & Development	0	October 22, 2014 18:34
Radiation interface	hinca	CFX	15	January 26, 2014 17:11

All times are GMT -4. The time now is 15:28.