CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

hydrogen jet into calm air

Register Blogs Members List Search Today's Posts Mark Forums Read

Like Tree1Likes
  • 1 Post By LoGaL

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   October 19, 2021, 07:06
Default hydrogen jet into calm air
  #1
New Member
 
Giuseppe
Join Date: Jun 2020
Posts: 10
Rep Power: 6
pulplus is on a distinguished road
Hi!
I need to model a hydrogen jet into a chamber with calm air. So basically it should be a gas-gas interaction, and, as I read from the manual, multiphase models can't be used for gas-gas problems. So how can I do it? Is there any tutorial? Moreover, do I have to create two separate zones for the nozzle from which the hydrogen comes in and for the ambient containing air?
Please help!
pulplus is offline   Reply With Quote

Old   October 19, 2021, 12:30
Default
  #2
Senior Member
 
Lorenzo Galieti
Join Date: Mar 2018
Posts: 375
Rep Power: 12
LoGaL is on a distinguished road
Hi, if the hydrogen is gaseous, you can model it with species transport, which is much easier than multiphase flow. You should understand why hydrogen and air (which by the way is in turn nitrogen mixed with oxygen ) in gas form can be considered a single phase . It has something to do with miscibility
pulplus likes this.
LoGaL is offline   Reply With Quote

Old   October 19, 2021, 13:35
Default
  #3
New Member
 
Giuseppe
Join Date: Jun 2020
Posts: 10
Rep Power: 6
pulplus is on a distinguished road
Thanks for your answer, I suspected it can be considered a species transport problem. Anyway, do you have any tutorial to suggest? I don't know how to set the simulation from the design modeler to fluent. Do I have to set two 2D bodies, one for the nozzle and one for the ambient with calm air? Moreover, how can I tell fluent that the air in the ambient is calm?
Thank you!
pulplus is offline   Reply With Quote

Old   October 21, 2021, 23:21
Default
  #4
New Member
 
iiran
Join Date: Jul 2021
Posts: 21
Rep Power: 5
ranxiaoran is on a distinguished road
Quote:
Originally Posted by pulplus View Post
Thanks for your answer, I suspected it can be considered a species transport problem. Anyway, do you have any tutorial to suggest? I don't know how to set the simulation from the design modeler to fluent. Do I have to set two 2D bodies, one for the nozzle and one for the ambient with calm air? Moreover, how can I tell fluent that the air in the ambient is calm?
Thank you!
Anyway, I think searching the combustion case in the youtube can be helpful for you
ranxiaoran is offline   Reply With Quote

Reply

Tags
air, ambient, hydrogen, jet

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Air entrainment model setup for spillway oajor FLOW-3D 4 November 17, 2016 13:02
Argon jet into Air : which solver should I use ? eddadagow OpenFOAM Running, Solving & CFD 1 December 4, 2012 05:10
Water jet in confined hot air cross flow Jim Clancy FLUENT 0 November 24, 2007 17:14
Air jet simualation Yue Zou Main CFD Forum 8 February 15, 1999 13:19
air jet simulation Yue zou Main CFD Forum 0 September 28, 1998 09:30


All times are GMT -4. The time now is 23:55.