CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

selective transfer through membrane

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   May 15, 2022, 15:37
Post selective transfer through membrane
  #1
New Member
 
BSP
Join Date: May 2022
Posts: 1
Rep Power: 0
jusMTo is on a distinguished road
I've to model a membrane such that a gaseous mixture (CO2, CO, H2) contacts the membrane surface & only H2 pass through it to the permeate side.

I don't have any idea about:
1. defining boundary conditions of membrane
2. working with porous media & calculating its properties.

Please, someone, let me know the step-through process for completing the model of the membrane in Ansys fluent.

Thanks in advance.
jusMTo
jusMTo is offline   Reply With Quote

Reply

Tags
boundary condition, floating point error, membrane diffusion, porosity coefficients, species mass fraction

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Problem with total heat transfer rate aswathy_raghu FLUENT 9 April 21, 2022 10:36
Error - Solar absorber - Solar Thermal Radiation MichaelK CFX 12 September 1, 2016 05:15
Question about heat transfer coefficient setting for CFX Anna Tian CFX 1 June 16, 2013 06:28
Convective Heat Transfer - Heat Exchanger Mark CFX 6 November 15, 2004 15:55
additional variable mass transfer in CFX5.6 john CFX 1 February 14, 2004 00:30


All times are GMT -4. The time now is 06:37.