CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

fully developed flow in the inlet of the helical pipe

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   October 26, 2022, 12:31
Post fully developed flow in the inlet of the helical pipe
  #1
New Member
 
hossein
Join Date: Oct 2022
Location: IRAN
Posts: 1
Rep Power: 0
hossein_kazemi is on a distinguished road
hi everyone
i have an issue in making fully developed velocity profile (parabolic inlet velocity) in the inlet of my helical pipe. as you can see the pipe inlet Formulas in the below pictures, this Formulas totally works for me in the straight pipe, but it doesn't works at all in helical pipe and gives me the wrong answer.
i have set the maximum speed at 2.7 m/s as you can see but it shows me 663 m/s in the refrence value and in results. and also when i run the program, it almost shows me 100 percent reverse flow on the pressure outlet, so the flow inside the helical pipe is completely reversed (in results flow enters the helical pipe in the outlet and flows out in the inlet).
what can i do to fix this?
i appreciate your help.
Attached Images
File Type: jpg ansys 1.jpg (69.2 KB, 9 views)
File Type: jpg ansys mesh 1.jpg (130.0 KB, 7 views)
File Type: png umax.PNG (16.9 KB, 7 views)
File Type: png uprofile.PNG (40.3 KB, 7 views)
File Type: jpg results.jpg (58.8 KB, 9 views)
hossein_kazemi is offline   Reply With Quote

Reply

Tags
fully developed, helical pipe, parabloc inlet, reversed flow

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
fully developed turbulent flow at inlet using mapped BC atul1018 OpenFOAM Running, Solving & CFD 0 August 21, 2020 06:44
Fully developed flow as inlet condition Gemmatrix STAR-CCM+ 1 December 6, 2016 05:02
UDF for fully developed turbulent flow at inlet soroushsaberi FLUENT 0 May 28, 2014 18:00
Fully Developed Flow kpsudhakar CFX 4 June 7, 2010 07:03
fully developed laminar pipe flow wendy CFX 11 January 16, 2002 18:12


All times are GMT -4. The time now is 02:18.