 |
 |
 |
|
|
|
[Sponsors] | ||||
May 1, 2024, 05:32
|
Encounter with CAD Importing Problem
|
#1 |
|
New Member
MAJAD
Join Date: May 2024
Posts: 1
Rep Power: 0  |
I've used fluid flow (meshing with fluent) in Workbench 2024 R1. Using SpaceClaim as the platform to design my model. While using the Watertight Geometry workflow, I encountered a problem with importing the CAD. It shows like this:-
Error: Error in CAD Import Error occurred during import. Error Object: #f Error: state/object/execute-command:Exception encountered in S_ExecuteTask: Error in CAD Import Error occurred during import. Error Object: () I've run the fluent separately as administrator and named the file in just a single name without any special symbol. Already did the CAD configuration manager, also reinstalled the software. Don't know what to do anymore:  ((Simply said, I've tried from the previous forum just told. But there is no chance that occurred, as for your reference: https://forum.ansys.com/forums/topic...th-cad-import/ & https://forum.ansys.com/forums/topic...-meshing-2022/ |
|
|
|
|
|
October 14, 2024, 02:29
|
|
#2 |
|
New Member
Sardar
Join Date: Dec 2021
Posts: 5
Rep Power: 5 |
Managed to solve the issue?
|
|
|
|
|
|
 |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Problem about importing geometry into icem | wztprofessor | ANSYS | 0 | August 4, 2022 05:38 |
| [Workbench] ANSYS Workbench CAD Interface for CATIA problem | NHeidfeld | ANSYS Meshing & Geometry | 6 | September 18, 2016 13:52 |
| Having problem importing surface reaction mechanism from CHEMKIN | Quntin | FLUENT | 0 | March 10, 2016 02:25 |
| [Commercial meshers] Separating regions Problem after importing from Fluent Mesher | peterhess | OpenFOAM Meshing & Mesh Conversion | 1 | March 1, 2016 09:45 |
| Problem of importing the geometry | Dany | CFX | 4 | March 28, 2003 10:49 |
Linear Mode
