CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Setting troe as the Reaction Type.

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   January 26, 2025, 03:02
Default Setting troe as the Reaction Type.
  #1
New Member
 
khalid
Join Date: Dec 2024
Posts: 2
Rep Power: 0
khalid1234 is on a distinguished road
hi

I need to set this equation for Fcent=0.5 to have a constant value as proposed in the mechanism attached in the second picture, so how much I need to put for each parameter, I was thinking of putting aplha=.5, T***=0, T**=-large number(-10000000000000000000)[e0=1], T*=large number [e-inf=0).

I need the whole equation to give 0.5



troe.jpg

mech.PNG

troe settings.PNG
khalid1234 is offline   Reply With Quote

Reply

Tags
chemkin mechanism, reaction kinetics

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[Commercial meshers] Problem with Mesh conversion from FLUENT Meshing to OpenFOAM mn17jyf OpenFOAM Meshing & Mesh Conversion 3 November 1, 2023 10:49
Instability in buoyantSimpleFoam Avandri OpenFOAM Running, Solving & CFD 0 August 7, 2020 17:13
reactingMultiphaseEulerFoam tonnykz OpenFOAM Running, Solving & CFD 2 June 15, 2020 03:09
Possible Bug in pimpleFoam (or createPatch) (or fluent3DMeshToFoam) cfdonline2mohsen OpenFOAM 3 October 21, 2013 10:28
Error during initialization of "rhoSimpleFoam" kornickel OpenFOAM Running, Solving & CFD 8 September 17, 2013 06:37


All times are GMT -4. The time now is 00:44.