CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Transient history post-processing in FIPOST

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   April 19, 2000, 12:24
Default Transient history post-processing in FIPOST
  #1
Charlie Fischer
Guest
 
Posts: n/a
Hi everyone,

My knowledge of FIPOST is limited so I'm hoping that this problem is trivial.

I want to present/plot the thermal-history data for a transient run. This I can do for one node. However, it would be more useful to look at the history of a number of nodes on the same plot. Also, I'd like to be able to adjust the scales of the axis.

Anyone had the same problem? If not, does anyone know how to dump out ascii files of the time history for user-specified nodes?

Many thanks in advance, Charlie
  Reply With Quote

Old   April 20, 2000, 11:45
Default Re: Transient history post-processing in FIPOST
  #2
Vitaliy Pavlyk
Guest
 
Posts: n/a
in FIPOST main menu:

1) Go to ALL

2) Go to XYSET (down in ALL FIPOST COMMANDS window)

3) Set the desirable axis limits (XMAX, XMIN, YMAX, YMIN)

4) Go to ENVIRONMENT in FIPOST main menu press SUPERIMPOSE (it should be toggled to ON)

5) Go to PLOT in FIPOST main menu

6) Plot HYSTORY of a node 7) Plot HYSTORY of another node (and so on)

You will find the ASCII output in file identifier.FIOUT

Hope it helps. =Vitaliy=
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Ansys Post processing ano999 ANSYS 1 May 27, 2011 17:24
NO model vs post processing in coal combustion,CFX sakalido CFX 1 April 15, 2011 15:07
Transient Angle of Attack Simulation Not Displaying in Post Josh CFX 35 August 5, 2009 10:16
fluent for post processing James FLUENT 0 April 21, 2006 05:43
post processing in CFD MANISH BHARGAVA Main CFD Forum 0 October 17, 1998 21:51


All times are GMT -4. The time now is 09:43.