CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Heal real faces command.

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 16, 2000, 12:21
Default Heal real faces command.
  #1
Jack Keays
Guest
 
Posts: n/a
Hi guys,

I know, I know, I gotta stop asking questions! I am wondering what the "Heal real faces" command means. Also, do the convert real faces and real edges command actually convert virtual geometry to real geometry?? It would be great if they did!

Jack.
  Reply With Quote

Old   June 19, 2000, 18:12
Default Re: Heal real faces command.
  #2
Shyam Kishor
Guest
 
Posts: n/a
Healing is designed to detect and fix accuracy problems of real (ACIS) geometry. In brief, it allows you to repair bad geometry. There are three main phases of Healing process a) Geometry Simplifications b) Stitching and c) Geometry building. Gambit 1.3 (soon to be released) also allows user interaction on its phases and their tolerances. Please check Gambit documentation and/or contact your Fluent Support Engineer for details.

Yes, Convert faces & edges commands allows you to convert non real(virtual/faceted) geometry to real. Moreover, it maintains existing mesh as well as topological connectivity. Face convert requires non real faces to have a mapped mesh on it. Gambit 1.3 also allows volume conversion. Again, please contact your Fluent Support Engineer for details.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
fprint problem MASOUD Fluent UDF and Scheme Programming 5 October 30, 2011 17:08
0 or 0.0 in udf wlt_1985 FLUENT 5 June 29, 2011 17:27
DecomposePar unequal number of shared faces maka OpenFOAM Pre-Processing 6 August 12, 2010 10:01
[blockMesh] BlockMeshmergePatchPairs hjasak OpenFOAM Meshing & Mesh Conversion 11 August 15, 2008 08:36
fluent add additional zones for the mesh file SSL FLUENT 2 January 26, 2008 12:55


All times are GMT -4. The time now is 14:47.