CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > ANSYS > FLUENT

Temperature Deviation

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Search this Thread Display Modes
Old   June 28, 2000, 09:51
Default Temperature Deviation
Posts: n/a
Somebody please suggest how I can plot the maximum temperature in the flow domain versus the flow time. Under temperature we have static temp, total temp., enthalpy, total enthalpy..., but no maximum temp. We have total enthalpy deviation, but no standard deviation for the temp. at any particular time. Do we have to define a UDF for that? If so, what macros are useful?
  Reply With Quote

Old   June 29, 2000, 15:26
Default Re: Temperature Deviation
Sung-Eun Kim
Posts: n/a
You can report and monitor min/max values in FLUENT 5.4 which will be released very soon.
  Reply With Quote


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Problem with zeroGradient wall BC for temperature - Total temperature loss cboss OpenFOAM 12 October 1, 2018 07:36
Calculation of the Governing Equations Mihail CFX 7 September 7, 2014 07:27
monitoring point of total temperature rogbrito FLUENT 0 June 21, 2009 18:31
High temperature methane+air Peter FLUENT 5 January 26, 2009 19:04
Time-plot of standard deviation of temperature rakib FLUENT 0 June 29, 2000 14:50

All times are GMT -4. The time now is 13:49.