CFD Online Logo CFD Online URL
Home > Forums > FLUENT

I need your help

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   October 13, 2000, 02:39
Default I need your help
Posts: n/a
How can I generate an imaginary plane in my calculation domain on which some specific conditions are given? I am going to use the sliding mesh method in my problem but this imaginary plane should keep stationary. Or in other words, this imaginary is actually a wall in my problem. Because the grid interface of the sliding mesh in my problem will inevitably cross this wall, which is not allowed in FLUENT, I have to treat this wall as an imaginary plane. Then I can set the velocities and temperature conditions on this plane. Do you think this is a good idea? Is it feasible? Thanks a lot!
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 18:01.