CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   FLUENT (https://www.cfd-online.com/Forums/fluent/)
-   -   Urgent (https://www.cfd-online.com/Forums/fluent/28028-urgent.html)

Pilli November 17, 2000 20:51

Urgent
 
I get always an error message during my simulation. Can somebody explain me what: Internal error at line 562 in file amgif.c detected?

Thanks for your help

Trac November 19, 2000 23:38

Re: Urgent
 
Your problem is diverging. Check the way you've set up the boundary conditions, the grid, initialization etc.

alice November 20, 2000 04:48

Re: Urgent
 
That's right, your problem diverges. What you can do, if your case is properly settled, is to relax the problem in the panel: solve--->controls---->solution. In this same panel, if you have choosen a high degree discretization model, you should start a few iterations with a lower degree.

Have fun!

Alice


All times are GMT -4. The time now is 04:43.