CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Multigrid controls?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   December 3, 2000, 00:04
Default Multigrid controls?
  #1
David
Guest
 
Posts: n/a
I am a new user to Fluent. Actually what is the function of multigrid controls under solve>control panel. Any suggestion is appreciated.
  Reply With Quote

Old   December 13, 2000, 00:52
Default Re: Multigrid controls?
  #2
Dan Williams
Guest
 
Posts: n/a
The fact that Fluent even provides these controls in the GUI is quite hilarious. Basically it says to me that they do not have the technical knowledge to figure out how to make their multigrid solver work well, and leave it to the user to tweak it until they get it right.

If you want to know more about multigrid though, a decent starting point is the Multigrid Tutorial by Briggs I think? Check in the information section on this website, I'm sure there is a reference on the CFD books section.

Other than that, read their user doc.

Dan.
  Reply With Quote

Old   January 19, 2001, 17:33
Default Re: Multigrid controls?
  #3
Dark Pain
Guest
 
Posts: n/a
Have you ever actually used Fluent? You reply to a lot of questions, but you seem to lack any real knowledge. In all the cases I've run with Fluent, I've never had to adjust the multigrid controls. Its nice that they are there if I should want to modify them, but it isn't necessary.
  Reply With Quote

Old   January 20, 2001, 02:50
Default Re: Multigrid controls?
  #4
John C. Chien
Guest
 
Posts: n/a
(1). The multi-grid issue is an important one. So, any comment or information is welcome here.(2). My experience with the code is: for the incompressible module (in UNS days), normally there is no need to fool around the setting, because the convergence rate is normally fast (faster than the Rampant module). (3). For the compressible flow module (in Rampant days), it normally did not work. In other words, trying to use multi-grid would encourage divergence. So, multi-grid option was not used for the compressible module. (4). Negative comments are extremely important for the forum, because it tends to encourage readers to present the positive experience, if such experience exists. (5). if we only present positive experience about the codes, both the users and the vendors will eventually die. (6). By the way, an expert does not need to have ahnds-on experience in order to make comments. The readers come here to learn from other reader's experience, he does not come here to hear the good news only. We welcome any comment from readers, especially those who are experts. For readers, it is important to read the contents of the question and the answer, but not the name itself. When one is preoccupied, it is hard to learn something new.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
LES by Multigrid mnabi Main CFD Forum 8 July 11, 2009 21:21
multigrid sureshkumar Main CFD Forum 0 June 9, 2006 02:20
Multigrid method Suresh kumar Main CFD Forum 1 April 24, 2006 21:07
Questions on Analysis Controls and Runtime Control Arnab Siemens 1 October 26, 2004 10:47
Multigrid applied to k-e models Paulo Zandonade Main CFD Forum 9 May 24, 1999 09:10


All times are GMT -4. The time now is 01:51.