 |
 |
 |
|
|
|
[Sponsors] | ||||
January 18, 2001, 04:36
|
looking for Fluent code
|
#1 |
|
Guest
Posts: n/a
|
Haw ca i have the code of calcul turbulent flow Fluent?
|
|
|
||
|
January 18, 2001, 14:35
|
Re: looking for Turbulent Flow Models
|
#2 |
|
Guest
Posts: n/a
|
Depending on extactly what kind of calcuations you need, look under define.
define models viscous |
|
|
|
||
|
January 20, 2001, 04:39
|
Re: looking for Turbulent Flow Models
|
#3 |
|
Guest
Posts: n/a
|
I need this code to simulation the confined jet flow using the K-E model of turbulence
|
|
|
|
||
|
January 20, 2001, 23:08
|
Re: looking for Turbulent Flow Models
|
#4 |
|
Guest
Posts: n/a
|
(1). Please visit the webpages of the code vendors or sponsors of this forum, to find out the code and your confined jet problem. (2). You can always write your own code to solve the confined jet problem. You can also try to use some general commercial CFD codes. There are free demo codes, and some are affordable codes.
|
|
|
|
||
|
January 21, 2001, 07:59
|
Re: looking for Turbulent Flow Models
|
#5 |
|
Guest
Posts: n/a
|
i haven't undestand whatu have say about the code vendors and sponsors ? please help me to find it and the other codes u have speak about them
excuse my english, i know it's verry bad. thanks. |
|
|
|
||
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| The FOAM Documentation Project - SHUT-DOWN | holger_marschall | OpenFOAM | 242 | March 7, 2013 12:30 |
| How to make code run in parallel? | cwang5 | OpenFOAM Programming & Development | 1 | May 30, 2011 04:47 |
| Open Source Vs Commercial Software | MechE | OpenFOAM | 28 | May 16, 2011 11:02 |
| Small 3-D code | Zdravko Stojanovic | Main CFD Forum | 2 | July 19, 2010 10:11 |
| public CFD Code development | Heinz Wilkening | Main CFD Forum | 38 | March 5, 1999 11:44 |
Linear Mode
