CFD Online Logo CFD Online URL
Home > Forums > FLUENT

UDF for pulsing flow.

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   February 1, 2001, 11:19
Default UDF for pulsing flow.
J. Keays
Posts: n/a

Would anyone have a udf that allows me to place a pulsatile flow at the exit from my pump, which is also elliptical in profile? I am modelling a single balded pump, so there is a large pressure pulse in each revolution. I have successfully implemented a udf to allow for this pulsing effect, but I would like ot make it so that the velocity profile is parabolic at the exit rahter than flat as is the case with the udf. So, how do I implement a parabolic profile on to a pulsing flow? Needless to say, the problem is been run unsteady.


  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
UDF to measure Mass Flow Rate a.lynchy Fluent UDF and Scheme Programming 22 September 26, 2017 12:50
UDF for transient pressure inlet, mass flow check at nozzle exit and volumetric heat kokoory FLUENT 0 August 17, 2011 02:07
How to define mass flow rate using UDF? SAMUEL FLUENT 3 December 25, 2004 01:36
How to define mass flow rate using UDF? SAMUEL FLUENT 0 December 16, 2004 03:55
UDF for multiphase flow ROOZBEH FLUENT 3 April 7, 2004 17:54

All times are GMT -4. The time now is 04:04.