Help in Phase-Change Problem

February 6, 2001, 05:45

I was trying to start with the phase change problem using FLUENT 5.3.18 and I follow the setup procedure (Phase Change Setup). After activating the: Define-->Models-->Energy from the menu and typing the: define-->models-->melt-freez and typing y [yes] for the yes and no question and I received a message :

Error: CAR: invalid argument [1]: wrong type [not pair] Error Object: #f.

Does it means that the Fluent version in our department didn't support the phase-change problem? Because from the help menu file that I have read I should be able to solve phase change problem.

Thanks for consideration on my problem.

February 7, 2001, 02:17

Hi, Just answer my self. The problem has been solved. You need to open the mesh first before changing the parameter of the melt-freez parameter (mesh.msh file). Thanks

February 6, 2001, 05:45	Help in Phase-Change Problem	#1
Barman Tambunan Guest Posts: n/a	I was trying to start with the phase change problem using FLUENT 5.3.18 and I follow the setup procedure (Phase Change Setup). After activating the: Define-->Models-->Energy from the menu and typing the: define-->models-->melt-freez and typing y [yes] for the yes and no question and I received a message : Error: CAR: invalid argument [1]: wrong type [not pair] Error Object: #f. Does it means that the Fluent version in our department didn't support the phase-change problem? Because from the help menu file that I have read I should be able to solve phase change problem. Thanks for consideration on my problem.

February 7, 2001, 02:17	Re: Help in Phase-Change Problem	#2
Barman Tambunan Guest Posts: n/a	Hi, Just answer my self. The problem has been solved. You need to open the mesh first before changing the parameter of the melt-freez parameter (mesh.msh file). Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
simulation of phase change material melting	rosol	FLUENT	4	December 8, 2015 08:56
Solid/liquid phase change using large viscosity	gregor.vidmar153	OpenFOAM Running, Solving & CFD	3	June 10, 2010 07:31
How to model the solid-fluid phase change in CFX	ohrmond	CFX	2	May 26, 2006 07:27
thermal phase change	serdar	CFX	3	May 3, 2005 07:50
Phase change process	Sang-jin Lee	Siemens	5	December 5, 2001 06:17