CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

define faces within GAMBIT in imported mesh

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 25, 2001, 08:10
Default define faces within GAMBIT in imported mesh
  #1
Elmar
Guest
 
Posts: n/a
Hi there,

I am trying to set boundary conditions on a 3D mesh of a gas turbine combustion chamber imported into GAMBIT. The mesh was exported from CFD-ACE, and obviously information concerning faces created for several inlets are lost, therefore only faces defining the outline can be selected. My question is whether faces such as circles for inlets can be redefined from existing cells or additionally embedded without remeshing the whole volume. Are there possibilities within GAMBIT or is there a solution when using any other meshing tool? Thank you for your advice!

Yours,

Elmar
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ICEM] Extrude Mesh without internal faces TWaung ANSYS Meshing & Geometry 3 May 29, 2019 06:18
[snappyHexMesh] snappyHexMesh won't work - zeros everywhere! sc298 OpenFOAM Meshing & Mesh Conversion 2 March 27, 2011 22:11
[snappyHexMesh] external flow with snappyHexMesh chelvistero OpenFOAM Meshing & Mesh Conversion 11 January 15, 2010 20:43
choosing faces in CFX with imported WB mesh mactech001 CFX 1 December 7, 2009 03:30
Free surface boudary conditions with SOLA-VOF Fan Main CFD Forum 10 September 9, 2006 13:24


All times are GMT -4. The time now is 18:50.