CFD Online Logo CFD Online URL
Home > Forums > FLUENT

help with FI-GEN

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   March 8, 2001, 00:37
Default help with FI-GEN
pradeep sivakumar
Posts: n/a
hi, i am trying to model a submerged elliptical jet impinging on a surface. the flow region consists of a box and i tried to make an elliptical hole on one face for the jet and mesh the solid,but i got the error "front face not matched by back face". so i created an identical ellipse on the opposite face,but i still get the same error. in an effort to overcome the error,i projected the ellipse on top(with no matching ellipse on the bottom for this case) through some distance(opposite direction) to create a solid and applied velocity conditions on the elliptical face coinciding with the flow region(box). but the post processing stage showed no flow deformation in the box or the flow region. does anybody know what i am doing wrong? thank you pradeep
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
blade gen tutorials Ramesh.K CFX 5 November 8, 2014 15:33
CFX-Blade Gen macduff CFX 4 May 22, 2014 03:31
CFX Blade Gen Wolfgang Heiser CFX 8 November 18, 2009 12:54
how to import the curve into blade gen fadly CFX 2 August 23, 2007 04:27
different flow rate, but same pressure gen. why? Richard CFX 0 March 9, 2006 09:57

All times are GMT -4. The time now is 15:51.