CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   FLUENT (https://www.cfd-online.com/Forums/fluent/)
-   -   input from ansys (https://www.cfd-online.com/Forums/fluent/28465-input-ansys.html)

reza besharati April 23, 2001 08:33

input from ansys
 
hi please help me to import my ansys three dimensional problem into fluent without the refernce to the help file of fluent. please help me do this thank in advance reza

Tong Tong April 25, 2001 12:41

Re: input from ansys
 
output style "*.igs" of Ansys is imported to gambit of Fluent.

Yong-Ju Hong April 27, 2001 07:47

Re: input from ansys
 
write cdb file using CDWRITE command in Ansys. cdb file can be imported to Fluent.

Yong-Ju Hong

Daniel Bruno May 10, 2001 22:39

Re: input from ansys
 
Use the command CDWRITE,ALL at Ansys, then you'll be able to read the file.cdb at Fluent. You will have to separate the grid into suitable regions for applying the boundary conditions. Use GRID -> SEPARATE -> FACES.

Hope this helps.


All times are GMT -4. The time now is 20:44.