CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > ANSYS > FLUENT

why I can't show "filled temperature contour"

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   June 14, 2001, 09:45
Default why I can't show "filled temperature contour"
Harry Qiu
Posts: n/a
Hi, Mr. or Mrs:

I am modeling a combustion problem.I want to see temperature distribution with Display->Contour->Temperature. If I didn't select "filled" option, it works well, but it doesn't work once I enable "filled" option. The screen outputs"floating error--out flow".Who can tell me how should I do?

Thank you.

Sincerely yours, Harry.
  Reply With Quote

Old   June 17, 2001, 08:05
Default Re: why I can't show "filled temperature contour"
Posts: n/a
Hi Harry,

I already have this kind of problem which seem to arise sometime if you try to plot filled contour on periodic or symetry plane.

I solved it by creating a new plane with small ofset from the plane (0.1 mm in my case)

Best regards

  Reply With Quote

Old   June 18, 2001, 22:50
Default Re: why I can't show "filled temperature contour"
Harry Qiu
Posts: n/a
Hi,Mr. Alain : thank u for ur answer. Sincerely, Harry.
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Problem with zeroGradient wall BC for temperature - Total temperature loss cboss OpenFOAM 10 March 5, 2015 07:57
Calculation of the Governing Equations Mihail CFX 7 September 7, 2014 06:27
Water subcooled boiling Attesz CFX 7 January 5, 2013 04:32
monitoring point of total temperature rogbrito FLUENT 0 June 21, 2009 17:31
chemical reaction - decompostition La S. Hyuck CFX 1 May 23, 2001 00:07

All times are GMT -4. The time now is 09:47.