Multiphase

May 23, 2001, 23:44

Hi, We are simulating the air-solid flow using FLUENT. Our problem is that when we go to the multiphase model, it does not read the solid material as the secondary phase and the air only appears in the phases. How to copy the solid phase to the multiphase model as secondary phase?

Amir

May 24, 2001, 05:33

Multi-phase in Fluent?

Good luck!! - You're going to need it!!

May 24, 2001, 09:28

Define your materials first.

Go through the multiphase tutorials first before tackling your problem.

May 25, 2001, 00:34

Dear LANRE, Thanks for your reply. How can find tutorials about the Multiphase flow other than the explanation of Chapter 15 in the user guide?

Amir

July 2, 2001, 05:48

Hallo,

define-materials: give a name of your material and its physical properties. change/create:it will be inserted in the material database. You need to create it(if it is not exist in the database) again every time you start Fluent to solve a multiphase flow problem! define/models-multiphase: here you you can choose a material for the primary phase and the secondary one, and identify other physical properties such as surface tension and wall adhesion. best regards

July 4, 2001, 11:43

why can't I find the solid phase in the SENCONDARY PHASE,just only Air in this column?I have done everything. Thanks a lot

August 6, 2001, 16:37

Did you load it on the materials window?

May 23, 2001, 23:44	Multiphase	#1
Amir Al-Wazzan Guest Posts: n/a	Hi, We are simulating the air-solid flow using FLUENT. Our problem is that when we go to the multiphase model, it does not read the solid material as the secondary phase and the air only appears in the phases. How to copy the solid phase to the multiphase model as secondary phase? Amir

May 24, 2001, 05:33	Re: Multiphase	#2
Isa Guest Posts: n/a	Multi-phase in Fluent? Good luck!! - You're going to need it!!

May 24, 2001, 09:28	Re: Multiphase	#3
Lanre Guest Posts: n/a	Define your materials first. Go through the multiphase tutorials first before tackling your problem.

May 25, 2001, 00:34	Re: Multiphase	#4
Amir Al-Wazzan Guest Posts: n/a	Dear LANRE, Thanks for your reply. How can find tutorials about the Multiphase flow other than the explanation of Chapter 15 in the user guide? Amir

July 2, 2001, 05:48	Re: Multiphase	#5
Adel Ataki Guest Posts: n/a	Hallo, define-materials: give a name of your material and its physical properties. change/create:it will be inserted in the material database. You need to create it(if it is not exist in the database) again every time you start Fluent to solve a multiphase flow problem! define/models-multiphase: here you you can choose a material for the primary phase and the secondary one, and identify other physical properties such as surface tension and wall adhesion. best regards

July 4, 2001, 11:43	Re: Multiphase	#6
lucy Guest Posts: n/a	why can't I find the solid phase in the SENCONDARY PHASE,just only Air in this column?I have done everything. Thanks a lot

August 6, 2001, 16:37	Re: Multiphase	#7
Rodrigo Guest Posts: n/a	Did you load it on the materials window?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Difference of multicomponent and multiphase homogenous flows	Luk_Fiz	CFX	11	April 4, 2013 05:29
Use data from multiphase into DO radiation	yashmash	FLUENT	0	October 7, 2011 03:57
Help: floating pressure, multiphase, closed domain	memahfud	FLUENT	1	September 24, 2009 03:38
multiphase multicomponent physics	ckleanth	CFX	3	June 4, 2009 20:15
Multiphase flow modeling	Paul	CFX	2	August 11, 2003 09:41