|
[Sponsors] |
October 15, 2001, 20:04 |
POROUS MEDIA
|
#1 |
Guest
Posts: n/a
|
Hello, I would like to know if it were possible to model porous media convective heat transfer in FLUENT 5.5. I am looking at 2-d case where the medium is encapsulated between two walls one at constant heat flux and the other at constant temperature, with the flow filed in the porous media. Thanks in advance, Murthy
|
|
October 16, 2001, 12:41 |
Re: POROUS MEDIA
|
#2 |
Guest
Posts: n/a
|
The convection with the walls will be performed, but not with the "solid" fraction of the porous medium itself.
|
|
October 16, 2001, 14:20 |
Re: POROUS MEDIA
|
#3 |
Guest
Posts: n/a
|
WIth regard to the message posted by Evan,I would like to know if it were possible to develop the energy eqaution for the porous media and embed this it into the solver( I have very little Idea of UDFs in FLUENT).Also I would like to know what would be the convetive heat transfer coefficient, do we use the capillary model for it. Thanks for the same, Murthy.
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Multiphase Porous Media Flow - Convergence Issues | VT_Bromley | FLUENT | 7 | May 14, 2020 16:34 |
Porous media setup issues in Fluent | Bernard Van | FLUENT | 29 | January 26, 2017 04:09 |
How to model granular flow through porous media | Axius | FLUENT | 2 | August 7, 2014 10:34 |
species mass source in porous media ? | PK | FLUENT | 0 | February 16, 2007 11:12 |
porous media: Fluent or Star-CD? | Igor | Main CFD Forum | 0 | December 5, 2002 15:16 |