CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

mesh under gambit for cylinder head

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   November 5, 2001, 12:51
Default mesh under gambit for cylinder head
  #1
TOM
Guest
 
Posts: n/a
Done a mesh under gambit for cylinder head and don't know if it is right!
  Reply With Quote

Old   December 11, 2001, 04:21
Default Re: mesh under gambit for cylinder head
  #2
Bipin
Guest
 
Posts: n/a
I personally have lot many experiences of accurate simulation performed by Fluent for a water jacket geometry meshed in GMABIT.

Bipin
  Reply With Quote

Old   December 11, 2001, 09:37
Default Re: mesh under gambit for cylinder head
  #3
TOM
Guest
 
Posts: n/a
Hi,

I am doing a engine cylinder under gambit and studying the flow and the combustion inside.

I have done everything roughly, basically, but it works, because I am just a rouky using fluent.

To have better results, can you tell me which type of mesh do I have to set for my engine cylinder and valves (edges, faces and volumes) and why.

Moreover if you have any stuffs (address, contact, doc.) about this, feel free to send me them.

Yours sincerely, TOM.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[snappyHexMesh] snappyHexMesh won't work - zeros everywhere! sc298 OpenFOAM Meshing & Mesh Conversion 2 March 27, 2011 22:11
Convergence moving mesh lr103476 OpenFOAM Running, Solving & CFD 30 November 19, 2007 15:09
Icemcfd 11: Loss of mesh from surface mesh option? Joe CFX 2 March 26, 2007 19:10
How to mesh a circle by Gambit? Zhengcai Ye FLUENT 5 March 24, 2006 02:04
[Commercial meshers] Mesh import from gambit Kaushik Balakrishnan (Balakrishnan) OpenFOAM Meshing & Mesh Conversion 5 April 21, 2005 14:42


All times are GMT -4. The time now is 21:23.