CFD Online Logo CFD Online URL
Home > Forums > FLUENT

contour plot--surface integral

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   December 4, 2001, 00:59
Default contour plot--surface integral
Posts: n/a
Can anybody help me out in this problem... first the contours of temperature on a blade surface was plotted..the temperature was as expected..then mass-wieghted temperature (surface integral)was calculated on the blade was ZERO K! ,when again temperature contour was plotted again it was ZER0 K! throught on the blade exit fluent without saving this case and repeat the process all over again but to see the same results..

Regards Theju
  Reply With Quote

Old   December 5, 2001, 23:55
Default Re: contour plot--surface integral
Jin-Wook LEE
Posts: n/a
It's clear because velocity in the wall is zero. For your case, I recommend that you use 'area weighted average'. See the definition of 'mass weighted average' in the manual or fluid dynamics textbook.

Sincerely, Jinwook
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
How can I make the axes in a contour plot in tecplot as log scale seminole Tecplot 0 July 6, 2011 00:20
Unable to view contour plot on a plane azurespirit ANSYS 0 May 23, 2011 08:35
Matlab PP: Generating X-vel Contour Error Plot Bennp2000 FLUENT 5 March 4, 2011 16:58
Contour Plot with Paraview jet OpenFOAM Paraview & paraFoam 0 August 26, 2010 10:30
Local surface contour line plots Nandu FLUENT 0 November 10, 2003 00:26

All times are GMT -4. The time now is 20:08.