CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Meshing parent and daughter arteries

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 6, 2002, 19:06
Default Meshing parent and daughter arteries
  #1
Pravir Kuma Rai
Guest
 
Posts: n/a
I want to draw 3 cylinders in the SAME PLANE having the dimensions specified : cyl.1-->radii-1.8cm , height-12 cm , cyl.2 and cyl.3-->radii-1.22 , height-4.76 cm

They have to be drawn such that it looks like Parent(cyl.1) and Daughter arteries(cyl.2 and 3). How do I draw it such that I can mesh the resulting geometry by hexahedral meshing.

  Reply With Quote

Old   February 9, 2002, 12:54
Default Re: Meshing parent and daughter arteries
  #2
sharad Dugad
Guest
 
Posts: n/a
if you have gambit tutirial guide, try tutorial on "three pipe junction", I hope you will get further ideas how to make relevant changes to obtain the geometry as you require it to be!
  Reply With Quote

Old   February 11, 2002, 20:16
Default Re: Meshing parent and daughter arteries
  #3
Pravir Kumar Rai
Guest
 
Posts: n/a
I have done the 3 pipe intersection but my problem is that all the 3 pipes are in same plane unlike in the tutorial problem.So how do I make separate volumes after uniting them by the sphere.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On



All times are GMT -4. The time now is 10:24.